This submersible turbidity probe provides a 4-20 mA current loop or a RS485 and Modbus (function 03, 06, 16) outputs.

Through commands from the personal computer hyperterminal, the serial interface allows the measuring and check signals transmission, the scale selection, the analog or digital operating mode selection, the zero and sensitivity calibration.

The autoclean of the sensing element is performed by the injection of clean air pressure, provided by the user.

For in tank installation, it is required the extension pipe adapter 0012.450043.


Specifications

• Scale: 0/4.000 – 0/40-00 – 0/400.0 NTU
• Power: 9/36 Vdc
• Load: 600 Ohm max. at 24 Vdc
• Temperature: -5/50 °C
• Pressure: 1 bar max at 25 °C
• Body: PVC
• Size: 165 mm
• Cable: 10 m
• Autoclean air: 3 bar max

    Download Datasheet