
BC 7687 Universal controller - transmitter
The instrument is used when there is a need to add display
functions, control, alarm, and / or automatic cleaning of the
sensor to a transmitter capable of performing any type of
measurement.
The instrument provides:
- measuring display in the selectable range from -9999 to 9999, corresponding to the 0-20 mA or 4-20 mA input;
- Vdc power to power the 4-20 mA loop of the transmitter;
- automatic measurement control function
- alarm from the low/high measurement, the set point overtime operation and the logic input;
- programmable dual analog output for recording and acquisition of the measurement values or PID regulation;
- hold / alarm function activated by two external volt free contacts
- automatic /manual autoclean function.
Specifications
This unit allows a differential measurement, by using two 0-20 mA or 4-20 mA transmitters featuring the same measurement scale.
Specifications
- Display: multi-line graphic
- Input from: 0-20 or 4-20 mA single or differential
- Scale: - 9999 / +9999 with selectable decimal point
- Measuring unit: selectable and 4 digit configurable
- 2 set-point with min/max function, hysteresys and delay time programmable
- Analog output: 0-20 or 4-20 mA isolated for PID regulation or measure transmission
- Min/max alarm relay, activate/deactivate function selectable
- Parameters configuration on two levels with access code selected by the operator
- Two logic digital input for hold or alarm function, selectable
- Power supply: 85/264 Vac - 50/60 Hz, 5 VA
- Enclosure: metallic, IP 65 frontal protection
- Dimensions: 98x98x104 mm (90x90x95 mm back)
- Registered design: 002564666-003